How To Install Intex Saltwater Pump

How to Claw Up a Salt Water Pump to an In a higher place Ground Pool Pump

A saltwater pump, or chlorine generator, is the extra equipment needed to run a saltwater pool. Installing the chlorine generator is uncomplicated and can be done in about 20 minutes. A chlorine generator uses salt, dissolved in the water, to produce chlorine that cleans the water.

Get crystal clear h2o with a saltwater pump.

Once installed, a saltwater system will rarely need additional salt to keep the water fresh. Catechumen your above basis chemic pool to a saltwater organization and first saving money.

Tip

Most above footing pools will use plastic hoses instead of PVC pipe. While at that place may be more than 1 make of saltwater system for pools, the installation volition basically be the same. Read all included instructions earlier installing your saltwater organisation.

Unplug all of the puddle components, such equally the filter pump, automated cleaner and the heater.
Locate the filter pump. There is one line coming from the pool to the pump and 1 going from the pump to the pool. If you have a heater, select the line from the heater to the pool.
Remove the line leading from the pump to the pool at the pool finish of the line. Install this line into the intake on the saltwater pump.
Connect the line, included with the system, from the outflow of the saltwater pump to the pool where the line was removed.
Run electricity to the saltwater pump by either calling an electrician to wire it to the house or running an extension cord.
Run the saltwater pump whenever the puddle pump is running.

The Baste Cap

A saltwater pump, or chlorine generator, is the actress equipment needed to run a saltwater pool.
Remove the line leading from the pump to the pool at the pool end of the line.